Residential · Melbourne, FL
If your old coating is peeling, stained, or hot-tire lifting, recoating starts with proper epoxy removal, not a quick scuff-and-topcoat. Elite Epoxy Melbourne has served Melbourne since 2018, stripping failed systems and rebuilding floors with industrial-grade primers and wear layers that bond.
Successful removal and recoating begins with testing the slab and the existing coating, then choosing the right removal method. We check for moisture vapor issues (ASTM F2170 RH testing and ASTM F1869 calcium chloride where needed), map cracks and spalls, and identify contaminants like oil, tire plasticizers, or silicone. Removal is typically done with industrial diamond grinding using HEPA dust control, and when thick build-ups or failed urethane-cement are present we may use scarifying or shot blasting to reach clean, profiled concrete. After removal, we vacuum, degrease, and repair the concrete with 100 percent solids epoxy crack filler or polymer-modified patch so the new system sits on a sound base.
Florida humidity, afternoon rain, and warm tire temps punish weak prep and cheap topcoats, so we build the finish for real conditions, not showroom photos. Depending on the space, we install moisture-tolerant epoxy primers, broadcast color flake into a full refusal for texture, then lock it in with a high-solids polyaspartic or aliphatic polyurethane topcoat for UV stability and chemical resistance. For commercial bays and heavy traffic, we can specify quartz broadcast, anti-slip additives, and thicker build systems that handle turning tires, forklifts, and frequent degreasing. You get a floor with the right concrete surface profile, controlled slip resistance, and predictable cure times based on temperature and dew point.
Melbourne customers choose us because we do epoxy removal the hard way when it is required, instead of coating over failure. Our crews show up with the right equipment (diamond grinders, edge tools, HEPA vacs, moisture meters) and a plan for dust control, furniture protection, and clean transitions at walls and doorways. We are licensed and insured, we provide a clear written scope, and we explain what can be saved versus what must be removed to stop peeling from coming back. Most importantly, we match the system to how you use the space, whether that is a garage with hot tires and saltwater air, a retail backroom, or a light industrial shop.
After recoating, we walk the floor with you and document the system that was installed, including prep method, repair areas, and the coating stack (primer, build coat, broadcast, topcoat). We confirm cure and return-to-service guidance, including when to walk, park, and wash, plus cleaning recommendations that will not dull the gloss or soften the topcoat. You receive a free written estimate up front, straightforward scheduling, and a finished surface that is uniform at edges, consistent in texture, and sealed for easier maintenance. If you have problem spots like tire pickup, drain areas, or chronic oil staining, we point them out and provide options so the floor performs long term.
seo_blocks_placeholder_remove_me
Sometimes, but only if the existing coating is sound and compatible. We typically test adhesion and, in many cases, grind off paint or failing coatings to get back to clean concrete so the new system can bond correctly.
We evaluate for moisture risk and recommend the right approach, which may include moisture-mitigating epoxy primers or, if conditions are too risky, delaying or choosing a different solution. The goal is to avoid bubbling, whitening, and delamination.
We install solid-color epoxy, full-flake in many blends, quartz systems for texture, and metallic epoxy for a decorative, marbled look. Topcoats can be gloss, satin, or matte depending on product selection and performance needs.
With proper prep and the right build, epoxy systems stand up well to tires, jacks, and typical automotive fluids. We can add a tougher urethane or polyaspartic clear coat for better abrasion resistance and chemical resistance.
Yes, we handle commercial and light industrial floors and can plan work in phases or off-hours to reduce downtime. The estimate will outline curing windows and traffic restrictions so operations stay predictable.
Epoxy removal is the step that determines whether a new coating bonds for years or starts peeling in months. When an old garage floor coating, shop floor epoxy, or flake system fails, the problem is usually poor concrete profiling, moisture vapor pressure, contamination, or incompatible layers. Elite Epoxy Melbourne removes failed coatings down to sound concrete, repairs the slab, and installs a new system designed for your traffic level, chemical exposure, and the Florida climate.
Not every floor needs full demolition, but every floor needs the right profile. We evaluate adhesion, thickness, and contamination, then select the correct mechanical prep, diamond grinding for most residential epoxy removal, shot blasting for uniform CSP on larger slabs, or scarifying for heavy build-ups. Edges and corners are detailed with dedicated edge grinders so the coating does not fail first at the perimeter. Where oil has soaked in, we use concrete degreasers and targeted grinding until the slab is clean enough to accept primer.
Recoating is built as a system, not a single layer. After repairs and final vacuuming, we apply a penetrating or moisture-mitigating epoxy primer, followed by a build coat sized to your use. Decorative flake broadcasts can be partial or full, quartz broadcasts can add traction, and cove base options help with washdown areas. A polyaspartic or aliphatic polyurethane topcoat adds abrasion resistance, chemical resistance, and UV stability so the finish holds its color and gloss longer.
If you are seeing peeling, hot-tire pickup, widespread staining, or bare concrete patches, schedule an onsite evaluation. We will tell you what is causing the failure, what must be removed, and what system makes sense for your budget and timeline. Get a free written estimate for epoxy removal and recoating in Melbourne, FL.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Melbourne. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
