Commercial · Melbourne, FL
Elite Epoxy Melbourne has served Melbourne since 2018, installing and repairing commercial epoxy flooring built for daily traffic, chemicals, and cleaning machines. We handle new installs, failed-coating removals, crack repairs, and refresh coats for warehouses, retail, medical, and back-of-house areas.
Commercial epoxy flooring performance starts with concrete prep and the right base system. We test slab condition, check moisture vapor transmission when needed, and map cracks, spalls, joints, and contamination from oil, tire rubber, or old sealers. Prep is done with industrial diamond grinding and, when required, shot blasting to reach a clean CSP profile, then we vacuum with HEPA dust control. From there we choose the correct primer and build coat, including 100 percent solids epoxy, epoxy mortar, or polyurea crack filler, so the coating bonds tight and cures to a dense film.
Florida humidity and hot slab temperatures change how coatings wet-out and cure, so we plan around dew point, surface temperature, and ventilation. For high-wear zones we install thicker builds, typically 20-40 mils for standard broadcast systems and more for mortar floors, with cove base where sanitation matters. Finish options include quartz broadcast for slip resistance, vinyl flake for easier maintenance and color, or a smooth high-gloss epoxy with a polyurethane or polyaspartic topcoat for UV stability and better scratch resistance. We can also add safety striping, aisle markings, and anti-slip aggregates to hit the traction level your facility needs.
Melbourne businesses choose us because we install commercial epoxy flooring like a system, not a single coat. You get clear scope, realistic cure times, and material selections that match forklifts, pallet jacks, hot tires, spill risk, and cleaning chemicals. Our crews protect adjacent walls and equipment, control dust, and keep the jobsite organized, with phased installs available to reduce downtime. We are licensed and insured, and every project starts with a written plan for prep, build thickness, and finish so facility managers know what they are buying.
At completion we do a walkthrough that covers sheen, texture, coverage at edges and penetrations, joint transitions, and striping accuracy. You receive care and maintenance guidance, including recommended cleaners, scrubber pad types, and when the floor can take foot traffic, carts, and heavy loads. For repairs, we identify root causes like moisture, poor prep, or impact damage, then tie new epoxy into the existing system with proper abrasion and overlap so patches do not peel at the seams. The result is a commercial floor built to clean fast, resist chemicals, and stay presentable under daily operations.
Sometimes, but only if the existing coating is sound and compatible. We typically test adhesion and, in many cases, grind off paint or failing coatings to get back to clean concrete so the new system can bond correctly.
We evaluate for moisture risk and recommend the right approach, which may include moisture-mitigating epoxy primers or, if conditions are too risky, delaying or choosing a different solution. The goal is to avoid bubbling, whitening, and delamination.
We install solid-color epoxy, full-flake in many blends, quartz systems for texture, and metallic epoxy for a decorative, marbled look. Topcoats can be gloss, satin, or matte depending on product selection and performance needs.
With proper prep and the right build, epoxy systems stand up well to tires, jacks, and typical automotive fluids. We can add a tougher urethane or polyaspartic clear coat for better abrasion resistance and chemical resistance.
Yes, we handle commercial and light industrial floors and can plan work in phases or off-hours to reduce downtime. The estimate will outline curing windows and traffic restrictions so operations stay predictable.
Commercial epoxy flooring is a practical upgrade for facilities that need a cleanable, chemical-resistant surface that holds up to traffic. Elite Epoxy Melbourne installs new epoxy systems and repairs failed coatings for warehouses, manufacturing areas, restaurants, retail back rooms, auto service bays, and medical or lab support spaces. We match the system to the way you operate, then build it over properly prepared concrete so it lasts.
A commercial epoxy floor is only as strong as its prep and base coat. We start by evaluating the slab, removing curing compounds and contaminated layers, and establishing the correct Concrete Surface Profile (CSP) with mechanical preparation. Cracks, spalls, and joints are treated with compatible fillers and patch materials, then we apply a primer and build coat designed for your use case, whether you need a smooth finish for easy mopping or a broadcast system for better traction and durability.
For repair work, we focus on diagnosing why the coating failed before we resurface. Common issues include moisture vapor pressure, improper prep, chemical exposure, or abrasion from forklifts and turning tires. We remove loose or compromised material, feather edges with grinding, and rebuild the system so the repaired area bonds and performs like the surrounding floor. If the entire surface is worn but still bonded, a recoat with proper abrasion prep can restore gloss and protection.
If you are comparing commercial epoxy flooring options in Melbourne, request a written estimate that spells out prep method, system type, and expected cure schedule. We will review finish choices, slip resistance, and maintenance needs, then recommend a coating system that fits your budget and operations without cutting corners on surface preparation.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Melbourne. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
