Residential · Melbourne, FL
If your counters are stained, dated, or hard to keep clean, an epoxy countertop coating can deliver a seamless, durable surface without a full tear-out. Elite Epoxy Melbourne has served Melbourne since 2018, installing and repairing epoxy countertop systems for kitchens, baths, bars, and commercial worktops.
A long-lasting epoxy countertop starts with the base. We inspect for loose laminate, swollen particleboard, cracked tile grout lines, heat damage around cooktops, and failed caulk at sinks. Then we degrease, remove silicone and contaminants, and mechanically abrade with a dust-controlled sander using 80-120 grit to create a bonding profile. Chips and seams are leveled with epoxy patch and filler, edges are rebuilt as needed, and we mask cabinets, walls, and plumbing penetrations for clean lines and controlled pour paths.
In Brevard County humidity, open-air windows, and daily kitchen steam, the finish choice matters as much as the epoxy. We apply a primer or moisture-tolerant bonding coat when needed, then install a 100% solids epoxy countertop coat with measured mix ratios and timed pot life control. Color is built with pigments, mica powders, metallic effects, or stone-look veining, and we control flow with notched spreaders, gauge rakes, and a calibrated heat gun or torch for bubble release. To improve scratch and UV resistance, we typically lock in the look with a clear polyaspartic or urethane topcoat, then set cure times for light use and full service based on product data sheets and site conditions.
Melbourne customers choose us because we install epoxy like a coating system, not a craft project. You get straightforward options for build thickness, edge detail, sink cut-in approach, and sheen level (matte, satin, or gloss), plus realistic expectations on heat and scratch resistance around pans, appliances, and knives. We are licensed and insured, protect surrounding finishes, and keep the jobsite controlled, ventilated, and clean. When repairs are needed, we troubleshoot root causes like poor surface profile, contamination, or topcoat wear, then spot-repair or recoat for a uniform finish instead of chasing patches.
Before we leave, we do a full walkthrough with you and document the finished surface, seams, and transitions at sinks, backsplashes, and cooktops. You get written care instructions, cure and recoat timelines, and guidance on trivets, cutting boards, non-abrasive cleaners, and how to avoid standing water at edges. We remove masking cleanly, confirm caulk lines, and check for smooth-to-touch edges and consistent gloss. The result is an epoxy countertop you can maintain easily, with a clear plan for long-term durability and future refresh coats if needed.
Sometimes, but only if the existing coating is sound and compatible. We typically test adhesion and, in many cases, grind off paint or failing coatings to get back to clean concrete so the new system can bond correctly.
We evaluate for moisture risk and recommend the right approach, which may include moisture-mitigating epoxy primers or, if conditions are too risky, delaying or choosing a different solution. The goal is to avoid bubbling, whitening, and delamination.
We install solid-color epoxy, full-flake in many blends, quartz systems for texture, and metallic epoxy for a decorative, marbled look. Topcoats can be gloss, satin, or matte depending on product selection and performance needs.
With proper prep and the right build, epoxy systems stand up well to tires, jacks, and typical automotive fluids. We can add a tougher urethane or polyaspartic clear coat for better abrasion resistance and chemical resistance.
Yes, we handle commercial and light industrial floors and can plan work in phases or off-hours to reduce downtime. The estimate will outline curing windows and traffic restrictions so operations stay predictable.
An epoxy countertop coating is a practical way to refresh worn laminate, tile, butcher block, or previously coated counters without a full replacement. Elite Epoxy Melbourne installs and repairs epoxy countertop systems for homeowners, restaurants, breakrooms, rentals, and light commercial spaces, focusing on surface prep, clean detailing, and a topcoat designed for real kitchen use. Whether you want a solid color, marble-look veining, or a metallic finish, we build the coating in layers that bond correctly and cure predictably in Florida conditions.
Every epoxy countertop job starts with substrate evaluation and mechanical abrasion for adhesion. We address common failure points like loose laminate, swollen seams, and movement cracks before coating. After cleaning and sanding, we level defects with epoxy filler, then apply the coating system in a controlled sequence: primer or bonding coat when needed, pigmented 100% solids epoxy build coats, design effects, and a protective clear topcoat. This layered approach helps the finish resist staining, reduces visible seams, and improves day-to-day cleanability.
For repair work, we match the existing sheen and color as closely as possible, then blend the repair area so it does not read like a patch. If the issue is widespread, we can sand and recoat the full countertop to restore clarity and uniform gloss. We also correct problems caused by poor prep, silicone contamination, or a worn topcoat by re-establishing the correct profile and reapplying the system.
If you are considering an epoxy countertop in Melbourne, we will provide a free written estimate with clear scope, prep steps, coating schedule, and curing expectations. You will know what can be saved, what needs rebuilding, and how to protect the surface during the first days of cure so you get a countertop that looks good and holds up.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Melbourne. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
